flyfox

On Server 2003、XP。
Server 端採預設安裝，語言記得選英文，裝好會要求重開機，
重開之後進入 SoftEther Virtual HUB Administration，勾選 localhost 進入操控台，
第一次進入會要求設定密碼，輸入兩次後就可以進入管理畫面，
選 1 - User Administration → 2 - Create User →
Create New User.
Username :flyfox
Password :****
Confirmation :****
Virtual HUB ID :test
You can set user's Security Option.
Enter Y or 1 to enable option.
Enter N or 0 to disable option.
Press only Enter key to no change.
Deny Connect (Off) :
Disable Session Reconnect (Off) :
Force to use IP Addess allocated by DHCP Server (Off) :
Limit to 1 IP Address to use. (Off) :
Limit to 1 MAC Address to use. (Off) :
Do not use existing IP Address (Off) :1
Do not use existing MAC Address (Off) :1
Do not send Broadcast Packet (Off) :
Do not send DHCP ACK Packet (Off) :1
Filter ALL DHCP Packets (Off) :1
Security Option was set.
Follow Security Options are Enabled:
Do not use existing IP Address
Do not use existing MAC Address
Do not send DHCP ACK Packet
Filter ALL DHCP Packets
User flyfox Created.

設完後回到 [USER ADMINISTRATION] → 9 - Back → 3 - Protocol Administration →
0 - TCP/IP Direct Connection → 指定連線所要使用 Port number →
Port Number (7777) :443 → 9 - Back → 9 - Logout (Disconnect)

區域連線 → 內容 → 進階 → 網際網路連線共用 → 勾選 SoftEther → 關閉 Windows 防火牆 →
確定

手動指定 SoftEther 虛擬網卡 IP，如：192.168.111.1

開啟 SoftEther Connection Manager → 刪除預設連線 → 建立新 Account →
填入先前管理畫面所建立之帳號及密碼 → Direct TCP/IP COnnection → Configure →
127.0.0.1 → Port 為先前管理畫面所指定埠號 → OK → Set to Startup Connection →
Connect 測試連線是否成功

Client 端採預設安裝，語言記得選英文，裝好會要求重開機，
重開之後手動指定 SoftEther 虛擬網卡 IP，如：192.168.111.2，
開啟 SoftEther Connection Manager → 刪除預設連線 → 建立新 Account →
填入先前 Server 端所建立之帳號及密碼 → Direct TCP/IP COnnection → Configure →
Server 端對外的 IP → Port 為先前 Server 端所指定埠號 → OK → Set to Startup Connection →
Connect 測試連線是否成功

可透過 SoftEther Virtual HUB Administration Console 來驗證連線是否成功，
2 - Session Administration → 1 - Session List →
# [Session Name] [Stat] [Username] [From] [HUB ID] [Delay]
0 SEID-1-0-test ACTI test 127.0.0.1 0 0
1 SEID-3-1-test ACTI test 10.2.128.58 0 0
Total 2 Sessions.